Certificate And Pac - Avaya 3641 Installation, Configuration And Administration

2.6

Certificate and PAC

The Handset Administration Tool (HAT) is used for enrolling a handset with a PEAP
certificate. Choose the Certificate tab and use the file browser to identify the certificate to
be loaded. Once chosen, HAT will perform a rudimentary check on the file to make sure
the format is DER and that the certificate date is valid. If these tests pass, HAT will
indicate that it is valid and enable the Enroll button. Click Enroll to install the certificate
onto the handset.

See the Administration Guide for complete instructions.
Certificate
The screen below shows a valid certificate that has been identified with the file browser.
PAC
For EAP-FAST, HAT is also used for provisioning a handset with a Protected Access
Credential (PAC). Choose the PAC file with the file browser. The user will be prompted to
enter the password used to generate the PAC as part of its validation process. Once the
PAC is considered to be valid, the Provision button will be available for installing the PAC
onto the handset.
The screen below shows a valid PAC identified with the file browser after a valid password
has been entered.
Issue 6, January 2011
Using the Admin Tabs
115