Registering Your Sra Appliance From System Status - Dell SonicWall SRA 4200 Administrator's Manual

Field
Firmware Version
ROM Version
CPU (Utilization)
Total Memory
System Time
Up Time
Active Users
Latest Alerts
The Latest Alerts section displays text about recent invasive events, irregular system behavior,
or errors. Latest Alerts includes information about the date and time of the event, the host of
the user that generated the event and a brief description of the event.
Any messages relating to system events or errors are displayed in this section. Clicking the
arrow button located in upper right corner of this section displays the Log > Log View page.
Fields in the Latest Alerts section are:
•
•
•
Licenses & Registration
The Licenses & Registration section indicates the user license allowance and registration
status of your SRA appliance. The status of your Analyzer, ViewPoint, Secure Virtual Assist, Spike
License, and Web Application Firewall licenses are also displayed here.
To register your appliance on MySonicWALL and manually enter the registration code in the
available field at the bottom of this section, see the
System Status" section on page
To register your appliance on MySonicWALL from the System > Licenses page and allow the
appliance to automatically synchronize registration and license status with the Dell SonicWALL
server, see the
Network Interfaces
The Network Interfaces section provides the administrator with a list of SRA appliance
interfaces by name. For each interface, the Network Interfaces tab provides the IP address that
has been configured and the current link status.
For information about configuration tasks related to the Network Interfaces section, refer to the
"Configuring Network Interfaces" section on page

Registering Your SRA Appliance from System Status

Register with MySonicWALL to get the most out of your SRA appliance. Complete the steps in
the following sections to register.
Date/Time - The date and time when the message was generated.
User - The name of the user that generated the message.
Message - A message describing the error.
"Registering the SRA Appliance from System > Licenses" section on page
Description
The firmware version loaded on the SRA appliance.
Indicates the ROM version. The ROM code controls low-level function-
ality of the appliance.
The type of the SRA appliance processor and the average CPU usage
over the last 5 minutes.
The amount of RAM and Flash memory on the appliance.
The current date and time.
The number of days, hours, minutes, and seconds, that the SRA appli-
ance has been active since its most recent restart.
The number of users who are currently logged into the management
interface of the SRA appliance.
"Registering Your SRA Appliance from
85.
88.
90.
System Configuration | 85