Setting The Monitoring Period
To set the monitoring period, select one of the following options from the Monitor Period
drop-down list in the System > Monitoring page:
•
•
•
•
Refreshing the Monitors
To refresh the monitors, click the Refresh button at the top right corner of the System >
Monitoring page.
System > Diagnostics
This section provides an overview of the System > Diagnostics page and a description of the
configuration tasks available on this page.
•
•
•
System > Diagnostics Overview
The System > Diagnostics page allows the administrator to download a tech support report
and perform basic network diagnostics.
Figure 17
112 | SRA 6.0 Administrator's Guide
Last 30 Seconds
Last 30 Minutes
Last 24 Hours
Last 30 Days
"System > Diagnostics Overview" section on page 112
"Downloading the Tech Support Report" section on page 113
"Performing Diagnostic Tests" section on page 113
System > Diagnostics Page