Dell SonicWall SRA 4200 Administrator's Manual page 206

Navigate to the Users > Local Groups page and click the
Step 1
or a local group to be configured for EPC.
When the Edit Local Group page appears, click the EPC tab. Use the EPC tab to enable or
Step 2
disable EPC for the group, select how to handle authentication requests from unsupported
clients, and to add or remove device profiles.
Figure 31
In the Enable EPC field, select Enabled to enable EPC for the group, Disabled to disable EPC
Step 3
for the group, or Use global setting to either enable or disable EPC based on whether EPC is
enabled on the Users > Local Users > Edit Global Policies or Users > Local Groups > Edit
Global Policies page.
EPC is not currently supported for Mac and Linux clients. In the Enable Mac/Linux Client
Step 4
Login field, set the default action to Enabled to allow or Disabled to block logins from these
clients when EPC is enabled.
EPC is not currently supported for mobile clients such as iOS, Android, and WinMobile. In the
Step 5
Enable Mobile Client Login field, set the default action to Enabled to allow or Disabled to
block logins from these clients when EPC is enabled.
Fields in the Recurring EPC section vary, depending on whether you are configuring EPC for
Step 6
the Global group or a local group. To configure EPC for the Global group, select Check
endpoint at login to perform EPC checks only when users login, or select Check endpoint at
login and every x minutes thereafter to also perform EPC checks at set intervals. For
example, to perform EPC checks whenever a user logs in and every x minutes thereafter while
the user is logged in, select Check endpoint at login and every x minutes thereafter and
type the number of minutes to wait between EPC checks.
206 | SRA 6.0 Administrator's Guide
End Point Control Settings for a Local Group
OR
Edit button for the Global group