Adding A Global Deny All Policy - Dell SonicWall SRA 4200 Administrator's Manual

Adding a Global Deny All Policy

This procedure creates a policy that denies access to the OWA resources to all groups, except
groups configured with an explicit Permit policy.
The SRA default policy is Allow All. In order to have more granular control, we add a Deny All
policy here. Later, we can add Permit policies for each group, one at a time.
Navigate to the Users > Local Users page.
Step 1
Click the Configure button
Step 2
appears.
In the Edit Global Policies window, click the Policies tab.
Step 3
Click Add Policy. The Add Policy window appears.
Step 4
Select IP Address Range from the Apply Policy To drop-down list.
Step 5
In the Policy Name field, type the descriptive name Deny All.
Step 6
In the IP Network Address field, type the network address, 10.200.1.0.
Step 7
In the Subnet Mask field, type the mask in decimal format, 255.255.255.0.
Step 8
In the Service drop-down list, select All Services.
Step 9
In the Status drop-down list, select DENY.
Step 10
Click Add.
Step 11
In the Edit Global Policies window, verify the Deny All policy settings and then click OK.
Step 12
in the Global Policies row. The Edit Global Policies window
Use Cases | 379