Adding The Sshv2 Permit Policy - Dell SonicWall SRA 4200 Administrator's Manual

In the Edit Active Directory Group window, select Mega Group from the Active Directory
Step 9
Group drop-down list and then click Edit.
Mega Group is listed in the Active Directory Groups table on the AD Groups tab.
In the Edit Group Settings window, click OK.
Step 10
On the Users > Local Groups page, click the Configure button in the IT_Group row. The Edit
Step 11
Group Settings window appears.
In the Edit Group Settings window, click the AD Groups tab and then click the Add Group
Step 12
button.
In the Edit Active Directory Group window, select IT Group from the Active Directory Group
Step 13
drop-down list and then click Edit.
IT Group is listed in the Active Directory Groups table on the AD Groups tab.
In the Edit Group Settings window, click OK.
Step 14
At this point, we have created the three Local Groups and associated each with its Active
Directory Group.

Adding the SSHv2 PERMIT Policy

In this section, we will add the SSHv2 PERMIT policy for both Acme_Group and IT_Group to
access the 10.200.1.102 server using SSH.
This procedure creates a policy for the SRA Local Group, Acme_Group, and results in SSH
access for members of the Active Directory group, Acme Group.
Repeat this procedure for IT_Group to provide SSH access to the server for members of the
Active Directory group, IT Group.
On the Users > Local Groups page, click the Configure button in the Acme_Group row. The
Step 1
Edit Group Settings window appears.
In the Edit Group Settings window, click the Policies tab.
Step 2
On the Policies tab, click Add Policy.
Step 3
In the Add Policy window, select IP Address in the Apply Policy To drop-down list.
Step 4
In the Policy Name field, enter the descriptive name, Allow SSH.
Step 5
In the IP Address field, enter the IP address of the target server, 10.202.1.102.
Step 6
In the Services drop-down list, select Secure Shell Version 2 (SSHv2).
Step 7
In the Status drop-down list, select PERMIT, and then click Add.
Step 8
In the Edit Group Settings window, click OK.
Step 9
382 | SRA 6.0 Administrator's Guide