Dell SonicWall SRA 4200 Administrator's Manual page 244

To configure global exclusions, perform the following steps:
On the Web Application Firewall > Settings page, expand the General Settings section.
Step 1
Click the Global Exclusions button.
Step 2
In the Edit Global Exclusions page, the action you set overrides the signature group settings
Step 3
for the resources configured on these host pages. Select one of the following from the Action
drop-down list:
•
•
•
In the Host field, type in the host entry as it appears in the bookmark or offloaded application.
Step 4
This can be a host name or an IP address. Up to 32 characters are allowed. To determine the
correct host entry for this exclusion, see
page
You can configure a path to a particular folder or file along with the host. The protocol, port, and
the request parameters are simply ignored in the URL. If a path is configured, then the
exclusion is recursively applied to all subfolders and files. For instance, if Host is set to
webmail.company.com/exchange, then all files and folders under exchange are also
excluded.
Click Add to move the host name into the list box.
Step 5
Repeat
Step 6
When finished, click Accept.
Step 7
244 | SRA 6.0 Administrator's Guide
Disable – Disables Web Application Firewall inspection for the host.
Detect – Lowers the action level from prevention to only detection and logging for the host.
No Action – Web Application Firewall inspects host traffic, but takes no action.
254.
Step 4 and Step 5
"Determining the Host Entry for Exclusions" on
to add more hosts to this exclusion.