To create a service definition, enter the following information:
Step 6
Name
Type
Start Port
Finish Port
Navigate to Ports in the left-hand navigation.
Step 7
Click the Add button.
Step 8
Select HTTPS from the Service Name drop-down list.
Step 9
Select ALLOW always in the Action drop-down list.
Step 10
Enter the WAN IP address of the SRA appliance (ex.192.168.100.2) in the Local Server
Step 11
Address field.
Click Accept to save changes.
Step 12
Your Netgear gateway device is now ready for operations with the SRA appliance.
368 | SRA 6.0 Administrator's Guide
HTTPS
TCP/UDP
443
443