Dell SonicWall SRA 4200 Administrator's Manual page 209

EPC is not currently supported for mobile clients such as iOS, Android, and WinMobile. In the
Step 5
Enable Mobile Client Login field, set the default action to Enabled to allow logins or Disabled
to block logins from these clients when EPC is enabled.
In the Recurring EPC section, configure when EPC checks should be conducted. Select
Step 6
Check endpoint at login to perform EPC checks only when users login, or select Check
endpoint at login and every x minutes thereafter to also perform EPC checks at set intervals.
For example, to perform EPC checks whenever a user logs in and every x minutes thereafter
while the user is logged in, select Check endpoint at login and every x minutes thereafter
and type the number of minutes to wait between EPC checks.
Fields in the Recurring EPC section vary, depending on whether you are configuring EPC for
Step 7
the Global group or a local user. To configure EPC for the Global group, select Check endpoint
at login to perform EPC checks only when users login, or select Check endpoint at login and
every x minutes thereafter to also perform EPC checks at set intervals. For example, to
perform EPC checks whenever a user logs in and every x minutes thereafter while the user is
logged in, select Check endpoint at login and every x minutes thereafter and type the
number of minutes to wait between EPC checks.
OR
To configure EPC for a local user, select Use global setting or Custom Setting from the
Recurring EPC drop-down list. If you select Use global setting, the local user inherits the EPC
settings from the Global group. If you select Custom Setting, the Check endpoint at login
and Check endpoint at login and every x minutes thereafter prompts are displayed and you
can configure EPC, as explained for the Global group.
Either select the Inherit group device profiles check box to use all defined Allow and Deny
Step 8
device profiles for the user.
OR
Add or remove profiles using the Edit EPC page:
To add or remove an Allow profile for the user, click the Add Allow Profiles button.
a.
In the Edit EPC page, select the profiles from the All Profiles list that you want to add
b.
for the user and click the Add selected profiles button. Selected profiles are then
moved to the In Use Profiles list on the page, which lists all device profiles that will be
used for the user.
To remove an Allow profile for the user, select the profile from the In Use Profiles list
c.
and click the Remove selected profiles button.
To add or remove a Deny profile for the user, click the Add Deny Profiles button and
d.
follow the preceding steps b and d.
End Point Control | 209