Position Of The Fabric Clamps And The Rest Plate To The Needle - DURKOPP ADLER 530 Operating Instructions Manual

6.3 Position of the fabric clamps and the rest plate to the needle

2
36
4
1
Caution: Danger of injury!
Switch off main switch.
Check and adjust rest plate only when the button sewing
automat is switched off.
Standard checking
The movement of the clamps 2 and 3 and the rest plate 1 is effected by
two step motors.
The seam pattern sizes can only be altered within the fabric clamps.
The position of the fabric clamps and the rest plate is adjusted in the
loading position "B".
–
In the seam pattern menu, set the speed to 0, press the pedal and
turn the machine manually.
Simultaneously check the position of the penetrating needle as to
the fabric clamps and the rest plate.
Correction
–
Press function key "F" when the main menu is displayed.
–
Enter code number "25483".
The display changes over to the technician mode.
–
Activate the menu "Machine configuration" with the key "OK".
–
Select parameter "Loading position".
–
Select function "B = Machine zero position".
–
Press the "OK" key.
The button sewing automat positions in the machine zero position.
–
Switch off main switch.
–
Loosen screws 4 and 5.
–
Align clamping arm and rest plate correspondingly.
–
Tighten screws 4 and 5.
3