8
7
13
6
–
Screw on gauge 6 (see chapter 6.1) with the two screws 7 and 8.
–
Switch on main switch.
The machine head positions in the machine zero position.
–
Move needle bar down by handwheel and check whether the
needle points to the marking 9 on the gauge 6.
12
Correction of the Y-axis
–
Loosen screw 11.
–
Adjust switch lug 10 correspondingly.
–
Tighten screw 11.
Correction of the X-axis
–
Loosen screw 12.
–
Adjust switch lug 13 correspondingly.
–
Tighten screw 12.
–
Switch main switch off and on again.
The button sewing automat positions in the machine zero position.
–
Move needle bar down by handwheel and check whether the
needle points to the marking 9 on the gauge 6.
9
6
11
10
3
35