3
2
30
6
Correction
Basic adjustment of thread trimmer lever 2
–
Loosen screw 6.
–
Adjust a distance of 18.5 mm between thread trimmer lever 2 and
the front of throat plate 3.
–
Tighten screw 6.
Counter-knife
–
Screw out screws 7 and take off knife 5.
–
Prepare the knife for the correct cutting pressure.
–
Insert knife and align it in such a way that the sewing threads are
cut in the middle of the blade.
–
Make sure to have a distance of 0.5 mm between needle hole 4
and counter-knife 5.
–
Insert and tighten screws 7.
4
5
7