Table of Contents
Advertisement
2.
Arm shaft
2.1 Preparatory work
4
1
Some of the adjustments at the arm shaft 1 can be carried out easier if
the thread trimming mechanism 3 is removed before.
Caution: Danger of injury !
Switch off main switch.
Remove and mount thread trimming mechanism only when the button
sewing automat is switched off.
Remove mechanism
–
Unscrew arm cover.
–
Loosen screw 4 at the thread trimmer magnet.
–
Unscrew screws 2 and 5 and take off thread trimming
mechanism 3.
Mount mechanism
–
Push thread trimming mechanism 3 on the magnet and place it on
the machine head.
–
Insert screws 2 and 5 and screw tight.
–
Tighten screw 4 at the thread trimmer magnet.
–
Adjust thread trimmer (see chapter 5).
5
4
3
2
Advertisement
Table of Contents
