Cylinder Head Cover; Removing Cylinder Head Cover; Fitting Cylinder Head Cover - Husqvarna TC449 Workshop Manual

Cylinder head cover

H01719
H01872
ENGINE DISASSEMBLY/REASSEMBLY

Removing cylinder head cover

• Remove screws with seal (1), and washers.
• Remove cylinder head cover (2) with gasket (3).

Fitting cylinder head cover

• Clean gasket (3) and cylinder head and cylinder head cover (2) sealing sur-
face.
• Apply sealant onto gasket.
Consumables
3 - Bond 1209
• Assemble cylinder head cover (2) with gasket (3).
• Fit screws with seal (1).
Tightening torque figures
Cylinder head cover on cylinder head
M6
Grease thread
F1.14
Surface sealer
7 Nm / 0,7 Kgm / 5,16 ft/lb
1 edition (08-2010) _Rev. 11-2010
st