Clutch Disassembly And Reassembly Or Replacement; Clutch Cover Disassembly; Removing Clutch Pressure Plate - Husqvarna TC449 Workshop Manual

Clutch disassembly and reassembly or replacement

H01987
H01988
H01733
ENGINE DISASSEMBLY/REASSEMBLY
Preliminary operations
Engine oil drainage
Securing crankshaft at TDC
Brake pedal release
Clutch actuator disassembly

Clutch cover disassembly

• Remove screws (1).
• Remove clutch cover (2) with gasket (3).

Removing clutch pressure plate

• Disassemble the following parts:
- Presser (1)
- O-Ring (2)
- Bearing (3)
- Screws (4)
- Pressure plate (5)
F1.26 1 edition (08-2010) _Rev. 11-2010
st