Shock Absorber Damping Adjustment - Husqvarna TC449 Workshop Manual

TC - TE - TXC
-
2
TC - TE - TXC
-
3
���
�
�
�
SMR
-
3
1 edition (08-2010) _Rev. 11-2010
st
SETTINGS AND ADJUSTMENTS

Shock absorber damping adjustment

Adjustment of the compression stroke is independent from the rebound stroke.
A) COMPRESSION - Standard setting:
1) Low damping speed:
TC - TE - TXC
+
(adjuster 1)
1
2) High damping speed:
TC - TE - TXC
H06421
SMR
(adjuster 2)
To reset the standard setting, turn upper adjusters (1) and (2) clockwise until reach-
ing fully closed position. Then turn them back to the above-mentioned positions.
In order to obtain a smooth braking action, turn the adjusters counter clockwise.
+
Vice versa to obtain a harder braking action.
B) REBOUND - Standard setting:
H06422
To reset the standard setting, turn lower adjuster (3) clockwise until reaching
fully closed position. Then turn it back by the mentioned clicks.
In order to obtain a smooth braking action, turn the adjuster counter clockwise.
Vice versa to obtain a harder braking action.
�
������
+
H06425
-11 turns
-11 click (± 2 click)
-1.1/4 turns
-18 click (± 2 click)
TE= -18 turns
TC-TXC= -17 turns
SMR= -11 click (± 2 click)
D.23