Husqvarna TC449 Workshop Manual page 129

1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY
• Apply a layer of sealant onto rubber sheath (2) sealing surfaces.
Consumables
3 - Bond 1209
• Position retaining plate (4), and pulse transducer (3).
• Insert rubber sleeve (2)
• Tighten screws (1).
Tightening torque figures
Pulse transducer onto engine left crankcase cover
M5 x 12 - 10.9, Microincapsulated
screw replacement
F1.23
Surface sealer
6 Nm