Front Fork Disassembly (Te) - Husqvarna TC449 Workshop Manual

FRONT SUSPENSION

Front fork disassembly (TE)

Loosen the cap nut at the top of each outer tube.
(Note: it is good practice to moderately slacken the cap nuts before removing
the fork legs from the motorcycle).
Loosen the fork cap nut and the nut with a wrench.
Remove top cap nut, spring retainer, spring and rebound adjuster rod.
Drain the oil.
Pump the piston rod up and down to drain oil from the cylinder.
I.18
1 edition (08-2010) _Rev. 11-2010
st