Pressure Plate Assembly; Clutch Cover Assembly - Husqvarna TC449 Workshop Manual

H01861
H01862
H01988
1 edition (08-2010) _Rev. 11-2010
st
ENGINE DISASSEMBLY/REASSEMBLY
• Make sure that the relief on the last steel washer is pointing outwards.
• Fit greased clutch plate pack (1).
Technical specifications
Clutch plates number
Consumables
Castrol GPS SAE 10W-40

Pressure plate assembly

• Fit pressure plate (5).
• Fit screws (4) working crossways.
Tightening torque figures
Pressure plate on clutch case
M5 x 12 - 10.9, Microincapsulated
screw replacement
• Fit bearing (3).
• Fit presser (1) with O-Ring (2).

Clutch cover assembly

• Clean gasket groove and bearing surface, check gasket and, if needed, re-
place it.
• Fit clutch cover (2) with gasket (3).
• Fit screws (1).
Tightening torque figures
Clutch cover on engine left crankcase cover
M6 x 25
F1.31
6 steel plates
6 lined plates
Engine oil
6 Nm
11 Nm