Husqvarna TC449 Workshop Manual page 371

TC - TE - TXC
2
SMR
2
TC - TE - TXC
SMR
1
1 edition (08-2010) _Rev. 11-2010
st
CHASSIS AND WHEELS
Fit the wheel between the fork legs so as to set the brake disc into the calliper.
Fit the wheel axle (2) from the R.H. side, after greasing it and push it fully
home against the L.H. fork leg; during this operation, the wheel should be
turned.
H06409
1
H06411
Tighten the screw (3) on the fork L.H. side but DO NOT lock it. Lock: the screws
(1) on the R.H. leg (10.4 Nm, 1.05 Kgm, 7.7 ft/lb), the screw (3) on the L.H. side
(51.45 Nm, 5.25 Kgm, 38 ft/lb), the screws (1) on the L.H. leg ( 10.4 Nm, 1.05
Kgm, 7.7 ft-lb).
After reassembly, pull the brake control lever until the pads are
3
against the brake disc.
H06410
3
H06412
Y.9