Clear Count Mode - Lexmark X215 MFP Service Manual

4038-001

Clear Count mode

The Clear Count mode is used to reset the various page counters /
cartridge counters stored in printer NVRAM.
To adjust Clear Counts:
1. Press Menu, #, 1, 9, 3, 4.
The LCD displays TECH.
2. Press Menu, and then Select.
3. Select Data Setup
4. Select Clear Count
5. You are prompted to enter the password. Press 1, 9, 3, 4 and
then Select.
6. The following choices are available and can be reset:
Total Page CNT
CRU Print CNT
FLT Scan CNT
ADF Scan CNT
Used Toner CNT
Edit Toner Dot
7. Press Return to go back to TECH screen.
8. Press Menu, #, 1, 9, 3, 4 to exit TECH mode.
3-2
Service Manual
The page count printed on the current fuser
(Total Pages)
The count of cartridges used (Cartridge
Pages)
The count of pages scanned by the Flatbed
(Platen Pages)
The count of pages scanned by the ADF
(ADF Pages)
The number of cartridge changes
(Cartridge Replacements)
The lifetime page count for the printer (Total
Toner Count