Send Level Mode; System Settings Report Mode - Lexmark X215 MFP Service Manual

4038-001

Send Level mode

The Send Level setting adjusts the transmission signal level of the
modem card. Typically, this level should be under 12dB.
Note: The Send Level is set at the factory at an optimal setting. Do
not arbitrarily adjust.
To adjust Send Level:
1. Press Menu, #, 1, 9, 3, 4.
The LCD displays TECH.
2. Press Menu, and then Select.
3. Select Data Setup.
4. Select Send Level.
5. Key in desired send level (9—15) and press Select.
6. Press Return to go back to TECH screen.
7. Press Menu, #, 1, 9, 3, 4 to exit TECH mode.

System Settings Report mode

This function prints a listing of all configuration settings, code
version levels, and page counts.
To print a System Settings report:
1. Press Menu, #, 1, 9, 3, 4.
The LCD screen displays TECH.
2. Press Menu, and then Select.
3. Select Report.
4. Select System Data.
5. A system settings page prints.
6. Press Menu, #, 1, 9, 3, 4 to exit TECH mode.
3-8
Service Manual