Lexmark X215 MFP Service Manual page 38

4038-001
Display
Paper Jam 0
2-6
Service Manual
Meaning
Paper was sensed at
the paper tray empty
sensor, but not at the
manual bypass.
Solution
• Go to the paper path
diagram "Printer
engine paper path/
paper jams" on
page 5-15 to see the
region where a paper
jam may occur.
• Remove any
obstructions and
other paper debris.
• Make sure the
manual bypass
sensor actuator is
not broken,
improperly installed
or stuck with paper
debris.
• Perform the "Sensor
test" on page 3-17
to check proper
operation of the
sensor.
• If the sensor works
properly, the problem
is likely associated
with the system
board.
• If the paper path and
sensor actuator are
clear and working
properly, and the
problem persists,
replace the HVPS/
LVPS.
Note: This sensor is
a component of the
HVPS/LVPS.