Lexmark X215 MFP Service Manual page 47

Problem
Illustrations
print incorrectly
in Adobe
Illustrator
Error occurs
repeatedly
when printing
with the USB
connection
LCD does not
turn on
Possible cause
Software program is
malfunctioning.
Operating system is
malfunctioning.
The setting in the software
program is wrong.
When the USB mode is set
to FAST, some users may
experience poor USB
communication.
Machine is not receiving
power.
Solution
Try printing a job from
another program.
• Exit Windows and restart
the computer.
• Turn the machine off and
then back on again.
Print the document with
Download as Bit Image
selected in the Advanced
Options window of the
graphic properties.
Change the USB mode to
SLOW.
1. Press Menu.
2. Press the scroll button
or
( ) until MACHINE
SETUP appears on the
top line of the display,
and then press Select.
3. Press the scroll button
until USB appears on the
bottom line of the display,
and press Select.
4. Press the scroll button
until SLOW appears on
the bottom line of the
display, and press
Select.
5. To return to the Ready
prompt, press
Stop/Clear.
• Check that the machine
is plugged into a properly
grounded electrical
outlet.
• Ensure that there is
power to the outlet and
that the machine power
switch is in the On
position.
• Go to "Dead machine"
on page 2-32
information.
Diagnostic information
4038-001
for more
2-15