Dial Mode; Error Rate Mode - Lexmark X215 MFP Service Manual

Dial mode

The Dial mode setting allows the modem card to be changed
between pulse or tone dial modes.
To adjust Dial mode:
1. Press Menu, #, 1, 9, 3, 4.
The LCD displays TECH.
2. Press Menu, and then Select.
3. Select Data Setup.
4. Select Dial mode.
5. Use the arrow keys to select the desired dial mode.
6. Press Select to save the setting.
7. Press Return to go back to TECH screen.
8. Press Menu, #, 1, 9, 3, 4 to exit TECH mode.

Error Rate mode

The Error Rate setting is a level used to automatically lower the
modem speed when errors occur. Whenever the error rate exceeds
this setting the baud rate of the modem card automatically drops to
2400 bps.This setting can be set at 5% or 10%.
To adjust the Error Rate:
1. Press Menu, #, 1, 9, 3, 4.
The LCD displays TECH.
2. Press Menu, and then Select.
3. Select Data Setup.
4. Select Error Rate.
5. Select the desired error rate value (5% or 10%) and press
Select to save the setting.
6. Press Return to go back to TECH screen.
7. Press Menu, #, 1, 9, 3, 4 to exit TECH mode.
4038-001
Diagnostic aids
3-3