Setting Up And Using The Accessibility Features; Enabling Magnification Mode; Activating Voice Guidance; Adjusting The Voice Guidance Speech Rate - Lexmark CX622 User Manual

Setting up and using the accessibility features

Setting up and using the accessibility features
Notes:
•
These features are supported only in some printer models.
•
For more information on the accessibility features of your printer model, see the Accessibility Guide at
http://support.lexmark.com.
Enabling Magnification mode
1
From the control panel, press and hold the 5 key until you hear a voice message.
2
Select Magnification mode.
3
Select OK.
For more information on navigating a magnified screen, see
page 29.

Activating Voice Guidance

From the control panel
1
Press and hold the 5 key until you hear a voice message.
2
Select OK.
From the keyboard
1
Press and hold the 5 key until you hear a voice message.
2
Press Tab to navigate the focus cursor to the OK button, and then press Enter.
Notes:
•
Voice Guidance is also activated when you insert headphones into the headphone jack.
•
To adjust the volume, use the volume buttons at the bottom part of the control panel.

Adjusting the Voice Guidance speech rate

1
From the home screen, select Settings > Device > Accessibility > Speech Rate.
2
Select the speech rate.

Navigating the screen using gestures

Notes:
•
The gestures are applicable only when Voice Guidance is activated.
"Navigating the screen using gestures" on
29