Machine Programming; Programming Controls - Saeco aulika SUP040 Operating Instructions Manual

Now the " " button (25) has been programmed. Whenever the
button is pressed and released, the machine will brew the same
amount that has just been set.
Note: The length of all products can be pro-
grammed with this procedure, except "AMERICAN
COFFEE" and "STEAM".
9

MACHINE PROGRAMMING

All the operations described in chapter 9 must
be performed exclusively by the service provider
or a specialised technician, who shall organise
all the operating steps and use only suitable means to en-
sure strict compliance with the safety regulations in force.
The specialised technician or the service provider can change
some of the machine operating parameters to suit the needs of
the users.
1 Press and hold the " " button for 5 seconds to access the
machine main menu.
MENU
BEVERAGE MENU
MACHINE MENU
Note: After 3 minutes of inactivity, the machine
will exit programming mode and return to stand-
ard operating mode.
Machine Installation - Service Provider Manual
9.1

Programming Controls

When the machine menus are accessed, the buttons on the key-
pad take on new functions.
" " "page down/change" button (25)
This button allows you to:
1 browse the pages within a menu;
2 change the parameters when they are made editable using
the "OK" button.
" " "page up/edit" button (24)
This button allows you to:
1 browse the pages within a menu;
2 change the parameters when they are made editable using
the "OK" button.
" " button (21) (OK)
This button allows you to:
1 select the function to display;
2 confi rm the parameter/value when it is made editable.
" " "ESC" button (22)
This button allows you to exit without changing the parameter
edited or selected.
Note: Press it repeatedly to exit programming mode.
• 35 •