Saeco aulika SUP040 Operating Instructions Manual page 50

Machine Installation - Service Provider Manual
Note: Use a container of at least 1.5 litres capacity.
Press the " " button (21).
DESCALING
STEP 1/2 DESCALING
PAUSE
If you do not have a container of this capacity,
pause the cycle by pressing the "
empty the container, place it back in the machine and re-
start the cycle by pressing the "
At this point, the machine will start dispensing the descaling
12
solution at intervals (the bar shows the cycle progress).
13 When the solution in the tank is fi nished, empty and rinse
the tank with fresh drinking water, as indicated by the machine.
DESCALING
RINSE TANK &
FILL WITH FRESH WATER
14 Rinse the water tank thoroughly and refi ll it with fresh drink-
ing water.
Insert the tank into the machine. Press the "
15
16 Empty the containers used to collect the liquid dispensed by
the machine.
• 50 •
17
back into the machine.
Press the "
18
Press the "
" button (22),
19
" button (21).
tainer under the Cappuccinatore.
Press the "
20
to be performed in order to ensure the best conditions
to brew products. A message to fi ll the water tank will be
displayed throughout the rinse cycle. This is normal and
part of the procedure.
" button (21).
the "
container or to leave the machine unattended for a short
time.
DESCALING
EMPTY DRIP TRAY
Remove any liquids from the drip tray and insert the tray
" button (21).
DESCALING
INSERT THE
CAPPUCCINATORE WITH
ALL THE COMPONENTS
Check that the Cappuccinatore is placed in the machine.
" button (21).
DESCALING
PLACE A CONTAINER
UNDER MILK AND HOT
WATER SPOUTS
Place a container under the hot water wand and a large con-
" button (21).
DESCALING
STEP 2/2 RINSING
PAUSE
The machine performs the rinse cycle.
Note: A default amount of water is needed for
the rinse phase. This allows an ideal rinse cycle
Note: The rinse cycle can be paused by pressing
the " " button (22). To resume the cycle, press
" button (21) again. This allows you to empty the