Descaling - Saeco aulika SUP040 Operating Instructions Manual

Machine Installation - Service Provider Manual
3 Insert the Brew Group back into its seat until it locks into
place, WITHOUT pressing the "PRESS" button.
4 Insert the coff ee grounds drawer and the drip tray. Close the
service door.
• 48 •

10.6 Descaling

Limescale is a natural part of the water used for machine opera-
tion. It needs to be removed regularly as it may clog the water and
coff ee circuit of your appliance.
The advanced electronics shows on the machine display (with
clear icons) when descaling is needed. Just follow the steps de-
scribed below.
This operation needs to be carried out before the appliance stops
working properly, as in this case repair is not covered by warranty.
Use the Saeco descaling product only. Its formula has been spe-
cifi cally designed to ensure better machine performance and op-
eration for its whole operating life. If correctly used, it also avoids
alterations in the brewed product.
The descaling solution and the complete "Maintenance Kit" may
be purchased at your local dealer or at authorised service centres.
Warning! Never drink the descaling solution or any
products brewed until the cycle has been complet-
ed. Never use vinegar as a descaling solution.
1 Turn on the machine by pressing the ON/OFF button. Wait for
the machine to complete the rinse and warm-up process.
Warning! Remove the "Intenza" fi lter before add-
ing the descaling solution.
Switch to programming mode as described in chapter 9.
2
3 Press the " " button (25) and select the "MACHINE MENU"
option.
Press the " " button (21) to access the menu.
MACHINE MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
FACTORY SETTINGS
4 Press the " " button (25) and select the "MAINTENANCE"
option.
Press the " " button (21) to access the menu.