Brew Group Lubrication - Saeco aulika SUP040 Operating Instructions Manual

7 Fill the water tank and press the "
fi rm.
BREW GROUP CLEAN
INSERT GROUP
CLEAN TAB
8 Insert the cleaning tablet in the pre-ground coff ee compart-
ment.
9 Having inserted the cleaning tablet, press the "
(21) to confi rm.
BREW GROUP CLEAN
PLACE A CONTAINER
UNDER THE
DISPENSING SPOUT
10 Place a container under the dispensing spout and press the
" " button (21) to confi rm.
BREW GROUP CLEAN
11 The machine completes the cycle automatically.
Note: At the end of the cycle the machine goes
back to its normal operating mode. It is recom-
mended to remove the group and wash it under fresh
running water.
Machine Installation - Service Provider Manual

10.5 Brew Group Lubrication

" button (21) to con-
Lubricate the Brew group after approximately 500 cups of coff ee
or once a month.
The grease to lubricate the brew group and the complete "Service
Kit" can be purchased at your local dealer or at authorised service
centres.
the "BEVERAGE MENU" (see section 9.2).
Before lubricating the brew group, clean it under running water
as described in the "Brew Group - Weekly Cleaning" chapter.
1 Lubricate the brew group guides using Saeco grease only.
" button
Apply the grease evenly on both side guides.
2 Also lubricate the shaft.
Note: To display the number of coff ee cups
brewed, please refer to the "COUNTERS" menu in
• 47 •