Saeco aulika SUP040 Operating Instructions Manual page 31

9 Press the " " button (21) to access.
ACTIVATE FILTER
ACTIVATE FILTER?
YES
Note: To exit the procedure, press the "
ton (22).
10 Press the " " button (21) to continue.
ACTIVATE FILTER
INSERT FILTER.
FILL THE TANK
11 Remove the tank from the machine and empty it. Remove
the small white fi lter from the tank and store it in a dry place
sheltered from dust.
Put the fi lter into the empty tank. Press it to its limit stop.
12
Fill the tank with fresh drinking water and reinsert it into the
13
machine.
Machine Installation - Service Provider Manual
14
the new fi lter.
NO
" but-
15
page 3).
16
Wait until the machine stops dispensing the necessary water to
activate the fi lter.
At the end of the cycle, remove the container previously placed
under the hot water wand.
screen. If the water fi lter is not available, insert the small
white fi lter previously removed (see step 11) into the
tank.
Press the " " button (21) to confi rm the introduction of
ACTIVATE FILTER
PLACE A CONTAINER
UNDER THE
WATER SPOUT
Place a large container under the hot water wand (Fig.07,
Press the " " button (21) to confi rm.
ACTIVATE FILTER
Note: At the end of the procedure, the display
automatically returns to the product brewing
• 31 •