Brew Group Cleaning With The "Coff Ee Oil Remover System - Saeco aulika SUP040 Operating Instructions Manual

Machine Installation - Service Provider Manual
CAPPUCCINATORE RINSING
PLACE A CONTAINER
UNDER THE
DISPENSING SPOUT
19 Place an empty container under the dispensing spout and
press the " " button (21) to confi rm.
CAPPUCCINATORE RINSING
The machine performs a Cappuccinatore rinse cycle.
20
The bar shows the rinsing progress.
21 Wait until the cycle stops automatically. The machine will go
back to the normal operating cycle.
22 Wash all the Cappuccinatore parts as described in section 5.4.
Important note: It is advisable to remove the Cap-
puccinatore from the machine when not being
used, in order to keep it clean.
10.4 Brew Group Cleaning with the
"Coff ee Oil Remover System"
As well as weekly cleaning, we recommend running the cleaning
cycle with the "Coff ee Oil Remover system" after approximately
500 cups of coff ee or once a month.
This operation completes the maintenance process of the brew
group.
Both the "Coff ee Oil Remover system" used to clean the Brew
Group and the "Maintenance Kit" may be purchased at your local
dealer or at authorised service centres.
Warning: The "Coff ee Oil Remover system" has no
descaling properties. To descale, use the Saeco
descaling solution and follow the procedure described in
the "Descaling" chapter.
The wash cycle cannot be interrupted. Do not leave the machine
unattended during this operation.
• 46 •
Warning! Do not drink the solution dispensed dur-
ing this procedure. The solution must be disposed
of.
1 Switch to programming mode as described in chapter 9.
2 Press the " " button (25) and select the "MACHINE MENU"
option.
Press the " " button (21) to access the menu.
3 Press the " " button (25) and select the "MAINTENANCE"
option.
Press the " " button (21) to access the menu.
MACHINE MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
FACTORY SETTINGS
4 Press the " " button (21) to access the menu.
MAINTENANCE
BREW GROUP CLEAN
DESCALING
CAPPUCCINATORE CLEANING
5 Press the " " button (21) to access the Brew Group clean-
ing cycle.
BREW GROUP CLEAN
PERFORM BREW
GROUP CLEANING?
YES
Note: If this option is confi rmed the cycle must be
completed. Press the "
6 Press the " " button (21) to start the brew group cleaning
cycle.
BREW GROUP CLEAN
REFILL
WATER TANK
NO
" button (22) to exit.