Saeco aulika SUP040 Operating Instructions Manual page 34

Machine Installation - Service Provider Manual
13 Press the " " button (25) to select the "MILK QUANTITY"
menu.
CAPPUCCINO
COFFEE TEMPERATURE
COFFEE LENGTH
MILK QUANTITY
DEFAULT
14 Press the " " button (21) to access.
MILK QUANTITY
15 Press the " " button (25) or "
the desired value and then let the bar advance; the number to the
side identifi es the bar value (in seconds).
Then press the " " button (21) to confi rm and exit.
When this phase is completed, the beverage is programmed. It is
recommended to perform a visual check of the result. To restore
the factory settings of a single beverage, proceed as follows.
Note: The factory settings can be restored for
each single beverage and the restored settings
will be applied only to that specifi c beverage. To restore
the other beverages' settings, enter the menu and restore
the settings.
16 Press the " " button (25) to select the "DEFAULT" menu.
CAPPUCCINO
COFFEE LENGTH
MILK QUANTITY
DEFAULT
Press the " " button (21) to access.
17
DEFAULT
RESTORE
FACTORY DATA?
NO
• 34 •
the "
18
The beverage factory settings have been restored. Press the "
button (22) once or more times to exit.
Visual Method
This method allows the product length to be set by the service
18
provider via keypad in visual mode, i.e. the product quantity is
adjusted while being brewed.
1
" button (24) to select
2
sage is displayed, then release. The machine is now in program-
ming mode.
3
MILK" message is displayed.
At this stage, press the "
amount of milk in the cup is reached.
4
The "STOP COFFEE" message is displayed.
At this stage, press the "
YES
amount of coff ee in the cup is reached.
Note: The restoring operation permanently de-
letes the stored data. To quit the procedure press
" button (22).
Press the " " button (21) to confi rm.
Place a cup under the dispensing spout (Fig.12, page 3).
Press and hold the " " button (25) until the "MEMO" mes-
MEMO
The machine starts the milk dispensing phase. The "STOP
MEMO
ESC
STOP MILK
" button (22) when the desired
The machine immediately begins the coff ee brewing phase.
MEMO
ESC
STOP COFFEE
" button (22) when the desired
"