Measuring And Adjusting Water Hardness - Saeco aulika SUP040 Operating Instructions Manual

8.11 Measuring and Adjusting Water Hardness

Measuring water hardness is very important in order to correctly
manage the "INTENZA+" fi lter and the frequency with which the
machine must be descaled.
1 Immerse the water hardness test strip in water for 1 second.
Note: The test strip is only valid for one measure-
ment.
2 Check how many squares change colour and refer to the ta-
ble.
Hardness 4
Hardness 3
Hardness 2
Hardness 1
The numbers correspond to the settings indicated in the fol-
3
lowing machine adjustments.
HARDNESS 4 (hard)
HARDNESS 3 (medium)
HARDNESS 2 (soft)
HARDNESS 1 (very soft)
4 Switch to programming mode as described in chapter 9.
MENU
BEVERAGE MENU
MACHINE MENU
To select the "MACHINE MENU" option, press the "
5
ton (25).
MENU
BEVERAGE MENU
MACHINE MENU
Machine Installation - Service Provider Manual
6 Press the "
7 Press the "
can be selected.
8 Press the "
9 Press the "
Note: The machine is supplied with standard ad-
justments, suitable for most uses.
10 Press:
the " " button (25) to increase the value
or
the " " button (24) to decrease the value.
11 Press the "
After adjusting water hardness, install the fi lter (Intenza+), as
described in the following section. Exit programming mode as
" but-
described in section 9.1.
" button (21) to access.
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
" button (25) until the "WATER MENU" option
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
" button (21) to access.
WATER MENU
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
" button (21) to access the "HARDNESS" menu.
HARDNESS
1
2
3
4
" button (21) to confi rm the selected change.
• 29 •