Scanner Manual Registration - Lexmark X203n Servise Manual

7011-2xx / 3xx
To adjust the flatbed edge erase setting, perform the following steps:
1.
In the Configuration menu, select the FB Edge Erase menu item.
2.
Use the
3.
When the desired value is displayed, press

Scanner Manual Registration

This item is used to manually register the flatbed and ADF on the MFP's scanner unit. Registration should be
performed whenever the ADF unit, flatbed unit, or controller card are replaced.
To manually register the ADF perform the following steps:
1.
In the Configuration Menu, scroll to the Scanner Manual Registration menu item.
2.
Press
3.
Scroll to the Print Quick Test Page menu item.
4.
Press
5.
To view and adjust the simplex ADF registration, place the quick test page into the ADF, scroll to the Copy
Quick Test Page item and press
6.
After the quick test page copies, scroll to ADF and press
7.
Scroll to Horizontal Adjust, and press
8.
Use the
Note: Each button press move the margin values one pixel in the respective direction.
9.
Press
10.
Scroll to Top Edge and press
11.
Use the
Note: pressing
12.
Press
To manually register the flatbed, perform the following steps:
1.
In the Configuration Menu, scroll to the Scanner Manual Registration menu item.
2.
Press
3.
Scroll to the Print Quick Test Page menu item.
4.
Press
5.
To view and adjust the flatbed registration, place the quick test page into the flatbed, scroll to the Copy
Quick Test Page item, and press
6.
After the quick test page copies, scroll to Flatbed, and press
7.
Scroll to Left Edge, and press
8.
Use the
Note: Each button press moves the margin values one pixel in the respective direction.
9.
Press
10.
Scroll to Top Edge, and press
11.
Use the
Note: Pressing
12.
Press
To exit REGISTRATION, press BACK
3-20
Service Manual
or to increase or decrease the setting's value.
.
.
or to increase or decrease the setting's value.
to accept the value.
.
or to increase or decrease the setting's value.
moves the margin up and pressing
to accept the value.
.
.
.
or to increase or decrease the setting's value.
to accept the value.
.
or to increase or decrease the setting's value.
moves the margin up, and pressing
to accept the value.
.
.
.
.
moves the margin down.
.
moves the margin down.
or STOP .
.