Registration; Printer - Lexmark X203n Servise Manual

Hide thumbs Also See for X203n:
Table of Contents

Advertisement

Diagnostics mode tests (Continued)
Transfer Adjust
Print Contrast
Charge Roll
Gap Adjust
Auto Dark Adj
REPORTS
Main setting's Page
EVENT LOG
Display Log
Print Log
Clear Log
Development Menu
Scanner Tests
ASIC Test
Feed test
Scanner sensor tests
EXIT DIAGNOSTICS

Registration

Printer

Print registration makes sure the black printing is properly positioned on the page.
To set print registration:
1.
Select REGISTRATION from the DIAGNOSTICS menu.
2.
Use
or
The message Quick Test Printing... appears on the display, and the page prints.
Retain this page to determine the changes you need to make to the margin setting's.
3.
Use
or
4.
Use
to decrease or
The message Submitting changes displays, and the original margin setting screen appears.
The print registration ranges are:
Description
Top margin
Bottom margin
See
"Transfer" on page
See
"Print contrast" on page
See
"Charge Roll" on page
See
"Gap Adjust" on page 3-10
See
"Auto Dark Adjust" on page
See
"Main setting's Page" on page
See
"Display Log" on page
See
"Print Log" on page
See
"Clear Log" on page
See
"ASIC Test" on page
See
"Feed Test" on page
See
"Sensor Test" on page
This selection exits Diagnostics mode, and Resetting the Printer
displays. The printer performs a POR, and returns to normal mode.
to select Quick Test, and press
to select the margin setting you need to change, and press
to increase the offset values, and press
Value
-50 to +50
Each increment corresponds to 8
scans at a 600 dpi scan rate (0.0133
.
inches or 0.339 mm)
The default is 0.
-25 to +25
Each increment causes
approximately 0.55 mm shift in the
bottom margin.
The default is 0.
3-9.
3-9.
3-9.
3-10.
3-10.
3-10.
3-10.
3-11.
3-11.
3-11.
3-12.
. See
"Quick test" on page
to confirm the value.
Direction of change
A positive change moves the image down the
page and increases the top margin. A negative
change moves the image up and decreases
the top margin. No compression or expansion
occurs.
A positive offset moves text down the page and
narrows the bottom margin, while a negative
offset moves text up the page and narrows the
bottom margin. The image is compressed or
expanded.
7011-2xx / 3xx
3-4.
.
Diagnostic aids
3-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

X204n

Table of Contents