3.
Lift the ADF unit up and away from the flatbed.
Note: The scanner registration must be set after replacing the ADF assembly. See
Registration" on page
ADF cable removal
1.
Remove ADF. See
2.
Disconnect the ADF cable from J2 on the controller board.
3.
Remove flatbed. See
4.
Route the ADF cable through the flatbed assembly. (Art Here)
3-20.
"ADF assembly removal" on page
"Flatbed removal" on page
4-46.
4-48.
7011-2xx / 3xx
"Scanner Manual
4-47
Repair information