Audio Setting - Sharp CD-DV650W Operator's Manual

Audio setting

button whilst
y the setup
PARENTAL".
e password
word that was
Setting the Dolby Digital Out
H
rrent password
1
Whilst a disc is stopped, press the SET UP button whilst
pressing down the SHIFT button to display the setup
er the default
screen.
2
Use the cursor 3 or 4 button to select the "DIT/DA Output".
3
ental level. Press the ENTER button and
then use the cursor 3 or 4
button to select "DOLBY
DIGITAL".
4
Use the cursor 2 or 3 button to select "STREAM" or "PCM".
STREAM:
PCM:
To exit the setup screen and return to the startup screen, press
the SET UP button whilst pressing down the SHIFT button or the
RETURN button.
Downloaded From Disc-Player.com Sharp Manuals
SELECT
Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby
Digital decoder.
Use this setting for a digital connection to the
PCM digital input socket of a DAT or MD, or
for a digital connection to a receiver (amplifier)
that does not have a Dolby Digital decoder.
3/21/07, 3:02 PM
DIT/DA output
DOLBY DIGITAL STREAM
DIT On
98kHz LPCM 98kHz
SAVE & QUIT SET UP