Table of Contents
Advertisement
A 3D sound can be set when playing a DVD recorded in Dolby Digital (multi channel)
only.
Adjust to a suitable level.
Note: This function invalid when playing a Video CD/MP3/WMA/CD-DA disc.
Select a Virtual Surround System mode to get a virtual surround effects.
A Dynamic Range Control can be set when playing a DVD recorded in Dolby Digital
(multi channel) only. For other disc (CD-DA, VCD & MP3/WMA), it is fixed at MAX.
MAX:Dynamic Range Control set to maximum
STD: Dynamic Range Control set to standard
MIN: Dynamic Range Control set to minimum
Off: Dynamic Range Control not setting
The audio processing setting can be reset to a factory condition by pressing the
ENTER button.
Select a digital output signal format
Stream: Select this when connecting the unit to a Dolby Digital/DTS surround amplifier.
PCM:
Select this to output in PCM format.
You can output a digital signal when playing a DVD/VCD/CD-DA discs.
The digital signal does not output.
If LPCM 48K is selected, PCM sound signals recorded at 96KHz are converted to
48KHz.
Set a 4 digit password to enter parental setting mode.
Set or change a parental setting level.
Downloaded From Disc-Player.com Sharp Manuals
Description
3/8/07, 9:12 AM
CD-DV650W
CD-DV850W
ENGLISH
E-30
Advertisement
Table of Contents
