Sharp CD-DV650W Operator's Manual page 58

continued)
Recording from a DVD (DVDs)
H
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with
the side A facing you.
Wind past the leader of the tape, on which recording cannot
be performed.
3
Press the DVD/CD button and load the desired disc.
4
Press one of the s 1 - s 5 buttons to select the disc to be
recorded.
5
Press the 0 button to start DVD playback.
If the disc you are using supports auto start, it starts to play
automatically (even if you do not press the 0 button), as soon
as you close the disc tray.
6
Press the I6 button.
Recording will be paused.
7
When DVD playback reaches the desired point, press the
0 button to start recording.
To stop recording:
Press the ■ button.
I It will stop the tape only. Another press of the ■ button will stop
DVD playback.
I Even when the DVD playback is finished, the tape will not stop. To
stop the tape, press the ■ button.
Downloaded From Disc-Player.com Sharp Manuals
3/21/07, 3:11 PM