Table of Contents
Advertisement
ack (continued)
To locate the beginning of a track
After that disc
H
ay.
To move to the beginning of the next track:
D player stops
Press the 2 4 PRESET W button for less than 1.5 seconds
during playback.
the empty tray
I You can skip to any track by pressing the 2 4 PRESET W
button repeatedly until the desired track number appears.
To restart the track being played:
sc and within 5
Press the 5 3 PRESET X button for less than 1.5 seconds
during playback.
I You can skip to any track by pressing the 5 3 PRESET X
button repeatedly until the desired track number appears.
hin 5 seconds,
Notes:
I You can locate the beginning of a track on a single disc only.
I The 5/3 or 2/4 button on the remote control allows you
the same operation.
it turns on.
To locate the desired portion
e unit turns on
H
For fast forward:
e unit turns on
Press and hold down the 2 4 PRESET W button for more
TAPE/TUNER/
than 1.5 seconds during playback.
For fast reverse:
k
Press and hold down the 5 3 PRESET X button for more
than 1.5 seconds during playback.
I Three speeds are available. Each time the 5 3 PRESET
e s 1 - s 5
X or 2 4 PRESET W button is pressed, the speed of fast
ss 0 button
scan changes in the following sequence:
1 (about
PRESET W W W W W
s playback
Notes:
button on the
I Normal playback will resume when the 0 button is pressed.
I You can locate the desired portion on a single disc only.
sing the 0 - 9
I When the end of the last track is reached during fast forward, CD
ontrol.
will go to next CD and start playback. When the beginning of the
first track is reached during fast reverse, the unit will enter the
ected track is
playback mode.
arted.
I The 5/3 or 2/4 button on the remote control allows you
the same operation.
Downloaded From Disc-Player.com Sharp Manuals
2)
2 (about
8)
3 (about
3/21/07, 3:08 PM
32)
Advertisement
Table of Contents
