Sharp CD-DV650W Operator's Manual page 70

ued)
Before transporting the unit
H
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the unit
emoved?
with discs left inside can damage the unit.
al or CrO
2
Clearing all the memory (reset)
H
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Whilst pressing down the I6
button, press the TUNING X X X X X button until "CLEAR AL" appears.
rs, or heads
ng playback,
with the tape.
nt forcibly.
.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset and CD programme.
L-CH", "R-CH"
Condensation
H
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave
al interference
the power on with no disc (or cassette) in the unit until normal playback
normal supply
is possible (about 1 hour). Wipe off any condensation on the transmitter
orrectly, it may
with a soft cloth before operating the unit.
wer on again.
on, unplug and
he memory by
Downloaded From Disc-Player.com Sharp Manuals
I6 button and the X-BASS/DEMO
I6 I6 I6
X-BASS
/DEMO
3/21/07, 2:43 PM