Table of Contents
Advertisement
)
Caution:
.
I Do not place two discs in one disc tray.
0 button.
I Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
I Do not push the disc tray whilst it is moving.
I Do not move the disc tray by hand. This may cause malfunctions.
I If the power fails whilst the tray is open, wait until the power is
restored.
sc and within 5
I If the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by mode
and then turn the power on again.
I If TV or radio interference occurs during CD operation, move the
s and within 5
unit away from the TV or radio.
I If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
back according
To play without activating the playback control
"next", "return"
H
pending on the
function (Video CD with P.B.C. only)
You can play a video CD with P.B.C. without activating the playback
n "auto pause"
control function.
the screen will
In this case, the menu screen will not appear, and the disc will be
use signal" has
played in the same way as a video CD without P.B.C.
I Default setting for VCD is P.B.C. OFF.
ed back, there
another video
After finish VCD TOC reading, when play key is pressed
it will start play the VCD in P.B.C. OFF mode.
I To turn to P.B.C. ON mode, press TOP MENU button in remote
control whilst in stop or playback mode.
I "5 3 PRESET X" and "2 4 PRESET W" button is invalid
during STOP whilst VCD disc in P.B.C ON mode.
Notes:
I The P.B.C. function also can be cancelled whilst in the playback
mode by pressing TOP MENU button in remote control.
I Some video CDs with P.B.C. cannot be played back when the
P.B.C. mode is off.
Downloaded From Disc-Player.com Sharp Manuals
3/21/07, 3:07 PM
Advertisement
Table of Contents
