Table of Contents
Advertisement
d)
deo cable
TV
Main Unit
RED
Setting the AC voltage selector
H
Check the setting of the AC voltage selector located on the rear panel
Component
before plugging the unit into a wall socket. If necessary, adjust the
video cable
selector to correspond to the AC power voltage used in your area.
(not
Turn the selector with a screwdriver until the appropriate voltage
supplied)
number appears in the window (110 V, 127 V, 220 V or 230 V - 240
V AC).
Connecting the AC power lead
H
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug the unit
cted socket.
first, the unit will enter the demonstration mode (see page 14).
and this unit. If
Notes:
torted.
I The unit will start the tape initialisation when plugged in to the AC
nt video inputs
socket. During this process, initialising sound will be heard and
with its matching
the unit cannot be turned on. Wait until the process is finished.
I Unplug the AC power lead from the wall socket if the unit will not
esigned for the
be in use for a prolonged period of time.
he images may
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration 2
is used, connect the unit using the AC plug adaptor supplied with the
unit, as illustrated. The AC plug adaptor is not included in areas where
the wall socket and AC power plug can be directly connected (see
illustration 1).
Downloaded From Disc-Player.com Sharp Manuals
3/21/07, 2:49 PM
Advertisement
Table of Contents
