Table of Contents
Advertisement
To play a disc
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD/CD button to display the startup screen
shown.
3
Load the disc(s) you want to play.
See page 20 for information about loading discs.
4
Press the 0 button to start playback.
Notes:
I If the disc you are using supports auto start, it starts to play
automatically (even if you do not press the 0 button), as soon as
you close the disc tray.
I The indicator "
you are using is damaged, if you load the disc upside down, or if
the region number of the disc you are using is one that is not
supported by this unit. If the above indicator appears, reload the
disc or replace it with another one.
I A safety feature automatically sets the unit to the power stand-by
mode if you set the volume level too high whilst playing certain
types of discs. If this happens, lower the volume level and restart
playback.
I The unit also can directly power on at CD function by pressing
DVD/CD button or direct playback (if last function is CD) by pressing
0 button during stand-by mode.
To play the desired disc:
Press one of the s 1 - s 5 buttons to select the desired disc and then
press the DIRECT PLAY button.
To stop disc playback:
Press the H button.
3/21/07, 3:05 PM
Downloaded From Disc-Player.com Sharp Manuals
UNKNOWN" appears on the display if the disc
Advertisement
Table of Contents
