Sharp CD-DV650W Operator's Manual page 41

Setting parameters using the
u
disc menu
e title you
Some DVDs include a disc menu that you can use to select subtitle
set, audio channel, and DTS or MPEG audio. You can also turn disc
menu on and off.
To turn on subtitling (example)
H
This function can be performed with only discs that have been played
once, totally or partially.
1
Whilst the disc is stopped, press the MENU button to
display the disc menu.
2
Use the cursor 3, 4, 1 or 2 button to select the subtitle
item on the disc menu.
3
Press the ENTER button to display the subtitle language
selection screen.
4
Use the cursor 3, 4, 1 or 2 button to select the desired
en played
subtitle language.
5
Press the ENTER button to register your selection and
utton to
display the subtitles in the language you have set.
Repeat the above procedure to make other settings (audio
title you
channel, DTS, MPEG audio, etc.).
Notes:
selected
I The procedure shown here provides only general steps. The actual
procedure for using the disc menu depends on the disc you are
using. See the disc jacket for details.
I The disc menu does not appear immediately after you load a disc.
menu".
It appears only if the disc has been played once, totally or partially.
g appears
I During playback, you can also press the SUB TITLE button on the
.
remote control for the same operation in steps 1 - 3.
The actual
c you are
ad a disc.
r partially.
Downloaded From Disc-Player.com Sharp Manuals
3/21/07, 3:06 PM
CD-DV650W
CD-DV850W
ENGLISH
E-40