Table of Contents
Advertisement
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
o 99, you can
programmed.
you like.
If you make a mistake, the programmed tracks can be cleared
by pressing the cursor 3 or 4 to go to unwanted number, then
press CLEAR/DISPLAY button.
5
Press the 0 button to start playback.
Adding tracks to the programme:
Programme setting has been previously stored.
Follow steps 1 - 3 to add tracks. The new tracks will be stored after
the last track of the original programme.
To clear the programmed selections:
1. Whilst in the stop mode, press the MEMORY/SET (MEMORY) button.
2. Select the track to be erased, by pressing cursor 3 or 4.
3. Press the CLEAR/DISPLAY button.
Notes:
I If there is no disc to select the disc number or there is a DVD disc
or MP3 disc, the disc selection will be prohibited.
I Opening the disc tray automatically cancels the programmed
sequence.
I Even if you press the ON/STAND-BY button to enter the stand-by
mode, the programmed selections will not be cleared.
MORY/SET
I During programme playback, random play is not possible.
I Once programmed, the contents will be memorised. When the
unit is stopped and then the 0 button is pressed, however, normal
CD playback will be resumed. To play back the memorised
the desired
programme, press the 0 button after press the MEMORY/SET
(MEMORY) button.
esired track
I To exit the programming procedure halfway through, press the
MEMORY/SET (MEMORY) button.
I This function is invalid for WMA and MP3 discs.
I If STOP button is pressed whilst in programme input mode, all
programmed tracks will be cleared.
I Programme mode cannot be entered whilst in repeat mode.
Downloaded From Disc-Player.com Sharp Manuals
Track select condition
Select disc
3/21/07, 3:08 PM
Advertisement
Table of Contents
