Table of Contents
Advertisement
Used to specify the colour system in accordance with the TV
connected when playing back an NTSC disc.
1
Whilst a disc is stopped, press the SET UP button whilst
pressing down the SHIFT button to display the setup
screen.
2
Use the cursor ▲ or ▼ button to select the "Display".
3
Press the ENTER button and
then use the cursor ▲ or ▼
button to select "TV MODE".
4
Use the cursor 2 or 3 button to select "NTSC" or "PAL".
About the NTSC settings:
NTSC:
PAL:
To exit the setup screen and return to the startup screen, press
the SET UP button whilst pressing down the SHIFT button or the
RETURN button.
Notes:
I When you playback the PAL discs, either setting of "PAL" can be
used on a PAL TV or a Multi-System TV.
I This setting is disabled during play operation.
3/21/07, 3:02 PM
Downloaded From Disc-Player.com Sharp Manuals
TV TYPE:
TV MODE:
TV SCAN:
VOUT:
OFFSET:
S3S
SELECT
Select this setting when you have an NTSC
TV or an NTSC-compatible Multi-System TV
connected to the unit.
Select this setting when you have a PAL TV
connected to the unit.
Display
4:3 LB
PAL
INTERLACE
CVBS/Y/C
SAVE & QUIT SET UP
Advertisement
Table of Contents
