Table of Contents
Advertisement
Tuning
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (X or W) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune
in to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
I When radio interference occurs, auto scan tuning may stop
automatically at that point.
I Auto scan tuning will skip weak signal stations.
I To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
I "j" will appear when an FM broadcast is in stereo.
s on.
: The unit
I If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
ns on and
and the sound becomes clearer.
R/GAME).
Downloaded From Disc-Player.com Sharp Manuals
FM stereo mode indicator
FM stereo receiving indicator
3/21/07, 3:09 PM
CD-DV650W
CD-DV850W
ENGLISH
E-52
Advertisement
Table of Contents
