Audio Setting - Sharp CD-DV650W Operation Manual

Parental setting (continued)
CD-DV650W
CD-DV850W
ENGLISH
Changing the parental level
H
1
Whilst a disc is stopped, press the SET UP button whilst
pressing down the SHIFT button to display the setup
screen.
2
Use the cursor 3 or 4 button to select the "
3
Press the ENTER button to display the password
verification screen.
4
Use the 0 - 9 buttons to enter the 4-digit password that was
set previously.
I If you forget your password, you can erase your current password
by pressing DVD STOP H button four times.
I Then repeat step 4 on page 24 again to enter the default
password.
5
Press the ENTER button to select level.
Use the cursor 1, 2 button to change the parental level.
E-25

Audio setting

PARENTAL".
Setting the Dolby Digital Out
H
1
Whilst a disc is stopped, press the SET UP button whilst
pressing down the SHIFT button to display the setup
screen.
2
Use the cursor 3 or 4 button to select the "DIT/DA Output".
3
Press the ENTER button and
then use the cursor 3 or 4
button to select "DOLBY
DIGITAL".
4
Use the cursor 2 or 3 button to select "STREAM" or "PCM".
STREAM:
PCM:
To exit the setup screen and return to the startup screen, press
the SET UP button whilst pressing down the SHIFT button or the
RETURN button.
SELECT
Use this setting for a digital connection of a
receiver (amplifier) equipped with a Dolby
Digital decoder.
Use this setting for a digital connection to the
PCM digital input socket of a DAT or MD, or
for a digital connection to a receiver (amplifier)
that does not have a Dolby Digital decoder.
DIT/DA output
DOLBY DIGITAL STREAM
DIT On
98kHz LPCM 98kHz
SAVE & QUIT SET UP